Description
Attributes:
- Application: widely used in school teaching,pottery bar, or at home use, satisfying the needs of the majority of professionals,amateur ceramic enthusiasts and the development of design pottery special equipment.
- The ceramic molding machine is with foot pedal, LCD screen, removable ABS basin and several pottery shaping tools. Detachable basin is easy to clean. And you can put small tools and water in the two small grids on the basin when you working.
- This pottery wheel machine is developed based on the requirements of professional pottery, children’s ceramic teaching, urban entertainment pottery etc.
Specification:
- Material: Metal + Aluminum Alloy
- Rated Voltage: AC 110V
- Rated Power: 350W
- Speed: 0-300 r/min infinitely variable
- Working Noise: <60 dB
- The direction of rotation: Forward and Reverse direction of rotation:
- Wheel diameter: 25cm / 10″
Users Manual:
- Check the stability of machine before use.If the machine is not stable,you need to adjust to the bottom of the lift feet, after the machine is stable, in connection with the power supply.
- When the device is connected to the power supply, push the leakage protector to the ON button and turn the forward or reverse switch.
- Don’t press the turntable with your hands while the machine is running.
- You can’t switch the forward/ reverse switch in an instant when the machine is running until the machine is completely stationary.
- Do not pour a large amount of water into the basin. Once a large amount of water is poured into the basin, the electricity will be cut off in time to clean up.
- Students and children must operate under professional guidance
- Power off and clean the machine in time after it is used.
